본문 바로가기 대메뉴로 바로가기

We are quick and our products are the highest quality.
You don’t need to waste your ti,e getting a quote.
You don’t have to wait a long time to receive your PCBs.
Why spend so much money getting PCBs?

Gerber file

Gerber files should have the following files.

  • Top circuit layer
  • Top solder mask
  • Top silk screen(if necessary)
  • Inner layers(if more than 4 layers)
  • Bottom circuit layer
  • Bottom solder mask
  • Bottom silk screen(if necessary)
  • Outline file
  • NC drill file(Excellon format)
  • Fab drawing, Drill drawing & Array panel drawing(helpful if included)
  • Readme file(helpful if included)
  • Please zip all files at once and send them to us.
  • Before zip files, please check the followings and trace min. width/space, annular ring and inner layer clearance.
Min. trace width/space Standard Advanced
Min. Outer layer trace width/space 0.004"/0.004" 0.003"/0.003""
Min. Inner layer trace width/space 0.004"/0.004" 0.003"/0.003""
1 oz finished-width/space 0.004"/0.004" 0.003"/0.003""
1.5 oz finished-width/space 0.005"/0.005" 0.004"/0.004""
2.5 oz finished-width/space 0.006"/0.006" 0.006"/0.006""
Annular ring(Pad size-drill size)
Min. Annular ring for via holes 0.008" after(pad size-drill size)
Min. Annular ring for part holes 0.016" after(pad size-drill size)
Inner layer clearance
We need 0.010" clearance at inner layers at least.
Frequent Missing files
When you upload your gerber files, please check the followings. Sometimes customers are missing files frequently.
1. Aperture list
RS 274X format file is no problems. But in the case of RS 274D format please include "aperture list".
2. Drill file
Drill file for PTH, NPTH and(or) slot hole files should be included. All sizes should be finished hole sizes.
3. Outline file
For routing programming we need the outline file. If it is separate file or within other files is O.K. please check the min. space from outline to coppers is 8 mil.
4. Stack up file
If multilayer boards, we need layer order & stack up information. We prefer our standard stack up. If not, there will be the extra cost.
5. Fab drawing with requirements
If there is a fab drawing file in the file, it is helpful to understand.
Maybe there are information for board thickness, layers, material, solder mask, silk screen, surface finish etc.
6. Array panel drawing
If you want to array boards in a panel, please provide array panel drawing. If not, it will be arrayed by our standard way.
7. Working panel sizes
Please click here.
8. Multiple boards in a panel
Please click here.
9. ENEPIG
Please click here.
10. BVH board
Please click here.

How to Order

Door to Door Delivery by
UPS, FedEx or DHL

  • UPS
  • FedEx
  • DHL

PayPal

Accept credit cards
in just minutes!

  • No Tooling charge
  • Free E-test(100%)
  • Shipping cost calculated
  • High quality
  • No MOQ
상단으로